TEG5328P-24-410W
Switch Tenda L3 Managed PoE, 29 ports
| Hardware | Especificaciones |
|---|---|
| Network standards | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d, IEEE802.1s |
| LED Indicator | - 1* Link/Act or PoE LED indicator |
| - 1* Link/1* Link/Act mode converting LED indicator | |
| - 1* PoE mode converting LED indicator | |
| - 1* PoE Max LED indicator | |
| - 1* Power LED indicator | |
| - 1* SYS LED indicator | |
| Interfaces | - 24 * 10/100/1000 Base-T Ethernet ports |
| - 4 * 1000 Base-X SFP ports | |
| - 1 * Console port | |
| Transmission media | Recommended: CAT5/5e UTP or better |
| Fan quantity | 2 |
| Level of protection | - Lightning protection for ports: 6kV |
| - Lightning protection for power: 6kV | |
| - ESD: | |
| - Air discharge: ±10kV | |
| - Contact discharge: ±8kV | |
| Forwarding mode | Store-and-forward |
| Switch capacity | 56Gbps |
| Packet forwarding rate | 41.70Mpps |
| Buffer | 12Mb |
| MAC address table | 16K |
| Jumbo frame | 10K |
| PoE power supply management | Support |
| PoE budget | - Single port: AF: 15.4W, AT: 30W |
| - Whole device: 370W | |
| Input voltage | 100-240V AC 50/60Hz |
| Power consumption | - Full load: ＜432W |
| - Empty load: ＜23W | |
| Dimension | 440.0mmx284.0mmx44.0mm |
| Mounting | - Desktop mounting: support |
| - Wall mounting: support | |
| - Rack mounting: non-support | |
| Energy Efficient | Support |
| Environment | - Operating temperature: 0°C - 45℃ |
| - Storage temperature: -40°C - 70°C | |
| - Operating humidity: (10% - 90%) RH, non-condensing | |
| - Storage humidity: (5% - 90%) RH, non-condensing | |
| Certification | FCC, CE, RoHS |
| Software | L3 Features |
| - Supports VLAN-based routing | |
| - Supports IPv4/IPv6 static routing | |
| - Supports static ARP | |
| - PoE power supply management | |
| - Supports port PoE configuration and power supply with priority | |
| - Supports PoE over-temperature protection | |
| - Supports PoE scheduled management | |
| - Supports intelligent management and PoE-powered device detection | |
| (port status, power assignment, and PoE-powered device status) | |
| Security features | |
| - ARP receiving limit | |
| - Unknown MAC address discard | |
| - DoS attack defense | |
| - 802.1x security authentication | |
| - Radius security authentication | |
| VLAN | |
| - IEEE 802.1Q VLAN | |
| - VLAN Layer-3 interfaces | |
| - Supports three port modes: Access, Trunk, and Hybrid | |
| DHCP Server | |
| - DHCP Relay | |
| - DHCP Snooping | |
| - Supports Option 82 policy configuration | |
| Port aggregation | |
| - Static aggregation | |
| - LACP dynamic aggregation | |
| Spanning tree | |
| - IEEE 802.1d STP (Spanning Tree Protocol) | |
| - IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) | |
| - IEEE 802.1s MSTP (Multiple Spanning Tree Protocol) | |
| - Supports edge port | |
| - Supports BPDU statistics | |
| Multicast | |
| - IGMP Snooping V1/V2/V3 | |
| - Supports port fast leave | |
| Port Mirroring | |
| - Supports N: 1 port mirroring | |
| Quality of Service | |
| - SP (Strict Priority) | |
| - SWRR (Simple Weighted Round Robin) | |
| - WRR (Weighted Round Robin) | |
| - Supports 802.1p port trust mode | |
| - Supports DSCP port trust mode | |
| - Supports a maximum of 8-queue service quality mapping | |
| ACL | |
| - Supports MAC ACL and IP ACL | |
| Loading and upgrade | |
| - Supports FTP/TFTP/HTTP upgrade | |
| - Supports configuration import and export | |
| Management and maintenance | |
| - Supports Telnet, Console | |
| - Supports SNMP V1/V2/V3 | |
| - Supports WEB management and maintenance | |
| - Supports Ping/IPv6/Tracert/Connection Detection | |
| - CPU Monitoring and memory monitoring |
- Marca: Tenda
- Codigo 34380
- SKU: TEG5328P-24-410W
- Disponibilidad: PreOrder
-
S/1 298.31
Precio Incluye IGV
Etiquetas: switch, tenda, managed, poe, , ports, teg5328p-24-410w