JL824A
Switch HPE FlexNetwork JL824A, 5140, 48G, PoE+ 370W, 4SFP+
I/O ports and slots | 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-48 support 10BASE-T/100BASE-TX, 1000BASE-T (full only) 4 SFP+ 1000/10000 SFP+ ports |
Additional ports and slots | 1 RJ-45 Serial Console Port |
Memory and processor | 512 MB SDRAM, 256 MB flash |
Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (HPE 5140 E Rack Mount Kit [R8M91A] sold separately) |
Input Voltage | 100 - 240 VAC, rated -54 to -57 VDC, rated (depending on power supply chosen) |
Physical characteristics | |
Dimensions | 17.32 in. (w) x 14.17 in. (d) x 1.72 in. (h) (44 cm x 36 cm x 4.36 cm) (1U height) |
Weight | 17.64 lb (8 kg) |
Performance | |
1000 Mb latency | < 5 µs |
10 Gbps latency | < 3 µs |
Throughput | 131 Mpps |
Routing/switching capacity | 176 Gbps |
Routing table size | 1024 entries |
MAC address table size | 16,384 entries |
Environment | |
Operating temperature | 23°F to 113°F (–5°C to 45°C) |
Operating relative humidity | 10% to 90%, noncondensing |
Non-operating/storage temperature | –40°F to 158°F (–40°C to 70°C) |
Non-operating/storage relative humidity | 5% to 95%, noncondensing |
Acoustic | Low-speed fan: 50.6 dB, High-speed fan: 54.6 dB; ISO 7779 |
Electrical characteristics | |
Frequency | 50/60 Hz |
Maximum heat dissipation | 160/1671 BTU/hr (168.8/1762.91 kJ/hr) for AC power. For DC power, minimum heat dissipation is 147 BTU/hr and 3037 BTU/hr. maximum. |
AC voltage | 100 VAC–240 VAC |
DC voltage | –54 VDC to –57 VDC |
Current | 10A |
Maximum power rating | 478W |
Idle power | 47W |
PoE power | 370W PoE+ |
Notes | Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600, up to 740W of PoE+ can be supplied. Maximum current rating for DC power is 25A. AC input power is 47W typical and 490W maximum (including 370W PoE+ consumption). DC input voltage range is –54 VDC to –57 VDC. Total DC input power is 43W typical and 890W with 800W PoE+ power consumption. DC input voltage range is –54 VDC to –57 VDC. DC input source is the HPE RPS1600. |
Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; RoHS Compliance |
Emissions | FCC Part 15 Subpart Class A; ICES-003 Class A; VCCI-CISPR 32 Class A; EN 55032 Class A; AS/NZS CISPR 32 Class A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 |
Immunity Generic ESD |
EN 55024 EN 300 386 |
Management | IMC; SmartMC, command-line interface; web browser; SNMP manager |
Etiquetas: switch, hpe, flexnetwork, jl824a, , 5140, , 48g, , poe, , 4sfp poe+, 370w 370w 370w